efi265 Posted March 21, 2022 Report Share Posted March 21, 2022 hi im trying to setup logging on my new g4+ setup for tuning afr's and cant find how to get afr readings .my g4 has it as wideband .i see lambda 1 and anv6 lambda ,i want tps,,map and engine speed how can i do this! also when i look at my fuel and ignition maps it has an option to view as a table .once again in the g4 software i have a table and the conventional map but again i havnt figured out how this is done .thanks https://1drv.ms/u/s!AsueBbAiWzmW1TxrDmM2AzueA-ZN?e=zL2A15 Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 21, 2022 Report Share Posted March 21, 2022 Update your firmware, yours is very old so I suspect it doesnt have the AEM calibration included that you are trying to use. Logging is the same as G4, hit F8 to start and stop logging or click the words "PC Log = Off" at the top right of the screen. K key swaps between text and surface view on any table. See this video if you want to set it up with both text and graphic view side by side: https://youtu.be/Eo9zBcIkacs Also, since you are new to the software I would suggest you go to >layout>load layout and choose the 1366 x 768 or the 1920 x 1080 layout depending whether you have an HD screen or not. These have many of the common pages already set up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.