2.0L_turbo Posted November 21, 2022 Report Share Posted November 21, 2022 Hey everyone I am in the middle of planning out wire sizes for a harness I will be building using autosport connectors. So far I have decided on all of the sensors and equipment I would like in the car and now I am working on a list of the wire size that I will be using. Mainly I am stuck on what size of wire to use the +14v going to the ECU, and the appropriate wire size for the coil packs which will be r35 gtr coils. And the last thing I wouldn't ming help with is how do you go about wiring the coils power wire correctly I tried looking in the help files but I could not find these coils. I am assuming that the wire would get ran to a relay controlled by key on power. Here is the chart I have so far also coils 1-4 is the signal wire not power and ground. https://drive.google.com/file/d/1PguwJ-YasTMU0ul-iZeCJ0Iu8eBLsti8/view?usp=drivesdk Quote Link to comment Share on other sites More sharing options...
Electredge Posted November 22, 2022 Report Share Posted November 22, 2022 18awg to the ecu, and 20awg or 22awg for each of the coil pack 12v/GND, they draw very little amperage Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.