sungwon Posted January 27 Report Share Posted January 27 hello Currently using link g4x monsoon but afr is not read The wiring was correctly entered on the ecu side, and the can setting was also done correctly (I also checked it by searching for can lambda). I also performed a version upgrade. I installed it several times before and there was no problem. But this time it didn't work, so I suspect that the sensor is defective. Are there other problems? Quote Link to comment Share on other sites More sharing options...
sungwon Posted January 27 Author Report Share Posted January 27 I just solved the problem by referring to a similar article in the forum. Thank you for your interest Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.