Gsta Posted March 11, 2023 Report Share Posted March 11, 2023 Hey Guys Currently in the process of collecting parts to wire into my g4x plug in ecu Will be connecting Link 5" mxs dash Link can lambada Link keypad Just wanted to make sure im going about it correctly The Plan Wideband =Can 2m extension, canjst into ecu can slot 1. Dash = dtm 4 for can high/low, can splitter, canjst into can slot 2 Keypad = Can splitter, canjst into can slot 2. May require can 2m extension for the dash/keypad. Wire both canjst into seperate 12v switch with a fuse tap and 5amp fuse, no added relays. Any info appreciated Cheers MR GTR 1 Quote Link to comment Share on other sites More sharing options...
aerace_fab Posted March 11, 2023 Report Share Posted March 11, 2023 That will work just fine. Remember the ECU and Dash have 120 ohm resistors built in so do add an extra on any node just those two and you will be fine. MR GTR and Gsta 1 1 Quote Link to comment Share on other sites More sharing options...
Gsta Posted March 23, 2023 Author Report Share Posted March 23, 2023 No worries, thanks for clearing that up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.