Daniel Martinsson Posted February 20, 2010 Report Share Posted February 20, 2010 Hello ! i have a problem with some analog channel input´s.. 1 : i get low fault codes on my tps, i have tryed to change high and low error values with no results. i cant change the possision of the tps because its pretty tight to the intake manifold. What shall i do to make the faultcodes disappear? if works perfectly true the trottle span however.. 2 : i get Low value error code on v1 which is turned off.. ?! this is what i got now, i have some other things but i dont really remember them now. R.G // Martinsson Quote Link to comment Share on other sites More sharing options...
Daniel Martinsson Posted February 20, 2010 Author Report Share Posted February 20, 2010 sorry, im using the g4 storm ecu on my bmw m42b18 turbo engine. i have it wired as fully seq Quote Link to comment Share on other sites More sharing options...
Dtech Motorsport Posted February 20, 2010 Report Share Posted February 20, 2010 Have you cleared the codes from the ecu? if not select the 'ECU Controls' tab at the top of your screen and click on 'clear ecu fault codes' Regards Dave [email protected] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.