powerboy Posted June 9, 2023 Report Share Posted June 9, 2023 Hi everyone I try to start my bike CB650. I triple-check all of ECU's conditions. There is only a crank sensor with 16-3 pattern (Link g4+ woking fine). Setup Inject test = OK Ignition test = visually confirm, spark is OK Engine protection rpm = 10,000 While cranking Engine rpm = OK Trigger error = only 1 count-up Injector and Ignition status = solid activate But it did not spark. Are there other parameters that I must recheck? Thank you CB650.pclx Quote Link to comment Share on other sites More sharing options...
Vaughan Posted June 9, 2023 Report Share Posted June 9, 2023 Take a trigger scope while cranking and a PCLink log of an attempted start and attach them here please Just had a quick look through your map and it specifies number of gaps as 3 when by the sound of it it should be 1 gap of 3 teeth. This is in Triggers -> Trigger 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.