Matt Alexander Posted August 30, 2007 Report Posted August 30, 2007 I'm wiring a G3 into a '98 LGT (2.5l). I'm wondering how to pair up the injector controls. stock ignition control is 1/2 and 3/4, so I'm wondering if I should do the same with injectors, or 1/3 and 2/4 like the manual suggests. Thanks! Quote
ashesman Posted August 30, 2007 Report Posted August 30, 2007 You can actually pair them anyway you like as it will not make any difference. I think you will find they are run individually by the factory ECU. But if you think the factory did 1/2 and 3/4 then I would wire them that way. Remember that the Subaru cylinder number and firing order are different from a conventional 4 cylinder engine, so don't take the manual too literally... Quote
Matt Alexander Posted August 31, 2007 Author Report Posted August 31, 2007 factory injectors are sequential. but ignition is waste spark, paired 1/2 and 3/4. I will wire the injectors the same way. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.