Kieran Posted January 9, 2009 Report Share Posted January 9, 2009 Hiya, I've found that the 4D / 5D fuel tables don't show in PCLink when I turn 4D / 5D fuel mode on. It's not a biggy at the moment, because I'm using the dual fuel table in overlay mode instead. However it seems odd that these tables don't show? This is so I can configure TPS correction on a Nissan SR20VET. I understand that the dual fuel table is the preferred method of doing this, but I would like to be able to use this table for high / low octane maps in the future. Cheers Kieran Quote Link to comment Share on other sites More sharing options...
Guest Dave Posted January 20, 2009 Report Share Posted January 20, 2009 Do you have the ecu connected when turning these maps on as if offline they do not display I believe this will be fixed in a future pclink release Regards David Heerdegen [email protected] Quote Link to comment Share on other sites More sharing options...
Kieran Posted January 21, 2009 Author Report Share Posted January 21, 2009 Thanks for your reply David. Yes I tried in both online and offline modes. Cheers Kieran Quote Link to comment Share on other sites More sharing options...
Kieran Posted February 2, 2009 Author Report Share Posted February 2, 2009 I can confirm that this has been rectified in ver. 4.3.4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.