Matt1436215419 Posted March 28, 2009 Report Posted March 28, 2009 Im running a Link G3 and PCLink V3.34. Is there any way to setup an LED which switches on when it reaches a particular boost level? The manual says how to wire up an LED, but what should be selected in the drop down list for Aux outputs? I can't find anything in PCLink to do with this... cheers -Matt Quote
Cameron Moore Posted March 29, 2009 Report Posted March 29, 2009 Hi Matt,You'll want to setup the Auxillary output as 'GP Output' with SW Cond 1 as 'MAP > Value 1' and Switch Logic: 'Cond 1 ONLY'. This will turn on the LED when the MAP is greater than the value you enter in the 'MAP __ kPa' box.-Cameron Quote
Matt1436215419 Posted March 30, 2009 Author Report Posted March 30, 2009 ah so simple, should've looked harder!! thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.