Cameron Jones Posted January 13, 2011 Report Share Posted January 13, 2011 Hey howsit going. Have just finished setting up my rb25det with a full wire-in G4 extreme Red. I have 6x Bosch Mec723 coils setup running from the rb Ignitor block. Do i need to setup anything different in the ignition from the default settings? Cheers Ive attached my map to check oversil80.pcl Quote Link to comment Share on other sites More sharing options...
martin battye Posted January 13, 2011 Report Share Posted January 13, 2011 just make sure you set the coil dwell for these coils.. or set the dwell with KV meter if info unavailable.. also you have some very odd settings in your pcl.. Quote Link to comment Share on other sites More sharing options...
Cameron Jones Posted January 13, 2011 Author Report Share Posted January 13, 2011 Im learning as i go along. The pcl file is from a friends R33 rb25det tune, that i have altered for my car. Mainly for his fuel map. How do i 'set the dwell with KV meter if info unavailable' How do you mean odd settings? Any advice/information is appreciated Quote Link to comment Share on other sites More sharing options...
Cameron Jones Posted January 13, 2011 Author Report Share Posted January 13, 2011 May have found my issue, the map of my friends is from a plugin, and mine is a wire in, and i dont think when i went to import the map that it imported anything, so the maps and tables i have are all wrong. I would have thought that it would have transferred them across. Cam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.