EFMotor Posted March 24, 2011 Report Posted March 24, 2011 As topic, does the g3 use the same communication protocol as the g4, so that it will be able to communicate with a race technology dash? Here is info about the adapter for the dash: http://www.race-technology.com/serial_interface_2_7535.html Quote
Dtech Motorsport Posted March 24, 2011 Report Posted March 24, 2011 Yes The G3 will work but it will need to be upgraded to the G4 firmware Regards Dave [email protected] Quote
EFMotor Posted March 24, 2011 Author Report Posted March 24, 2011 Does the ecu need to be sent back to NZ for this upgrade, or is it just done as a normal firmware update? Ws not aware of that this upgrade is possible. Quote
Dtech Motorsport Posted March 24, 2011 Report Posted March 24, 2011 you will need to contact your nearest dealer with your ecu serial number they will then give you a code to enter when prompted by the firmware update software there is a cost for the code so call your nearest dealer first to discuss Regards Dave [email protected] Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.