Jump to content

Knock Signal Not Working, Do I Have the Correct Sensor?


Josh Burt

Recommended Posts

Engine is a 1998 M3 S52, comes stock with some sort of Bosch injector plug knock sensors. I have tried all of the different frequencies, as soon as I get into boost the knock value maxes or comes close to maxing out on all cylinders with a gain of 1. I put in a gain of .5 and when I get into boost the knock signal goes to about 500. I threw an extra 4deg at cyl 1 and the signal looks exactly the same. I am wondering if I have the wrong sensor or what.

Link to comment
Share on other sites

I pulled the intake and took a closer look, I was mistaken. It turns out my car has Siemens knock sensors. I have tuned vehicles with Motec using a Bosch 0 261 231 148 sensor which has a wide spectrum of frequency range. I would think this would work on a Link, but who knows.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...