Admiral Akhtar Posted June 17 Report Share Posted June 17 So I am aware that the Tacho has a key on Sweep option, but i'm just wondering if there is anywhere in the G4X ECUs that I can configure a Key on/startup Sequence to briefly trigger Aux Outputs? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted June 17 Report Share Posted June 17 There isn't anything specific but you could set something up with timers and GP Outputs, what exactly do you want it to do? Quote Link to comment Share on other sites More sharing options...
Admiral Akhtar Posted June 17 Author Report Share Posted June 17 2 hours ago, Vaughan said: There isn't anything specific but you could set something up with timers and GP Outputs, what exactly do you want it to do? I have a few LEDs in the Cluster at the moment that simulate a Shift/Warmup light, similar to what it is used in Factory BMW M cars. I would probably have them turn on sequentially, then flash briefly, as they are already setup on the GP PWM outputs to control their functionality Quote Link to comment Share on other sites More sharing options...
Vaughan Posted June 18 Report Share Posted June 18 if you setup a timer to go from say 0-10 and then have it never reset you could set each light to be on based on your normal conditions OR (timer > 2/4/6/8s AND timer < 10) using GP Outputs Or to get them to flash maybe make them GP PWMs with that timer but set to say 15s on one axis of the DC table with 0% at 0s, 100% from 2/4/6/8s till like 10s and then 50% for another few seconds until the timer is done and set the frequency value to suit your flashing. Or alternatively if you have all the increase and flash already setup to suit your engine speed and you just want to do that then feed it tacho frequency instead of engine speed in your setup so that it moves with the tacho sweep. Quote Link to comment Share on other sites More sharing options...
Admiral Akhtar Posted June 18 Author Report Share Posted June 18 11 hours ago, Vaughan said: if you setup a timer to go from say 0-10 and then have it never reset you could set each light to be on based on your normal conditions OR (timer > 2/4/6/8s AND timer < 10) using GP Outputs Or to get them to flash maybe make them GP PWMs with that timer but set to say 15s on one axis of the DC table with 0% at 0s, 100% from 2/4/6/8s till like 10s and then 50% for another few seconds until the timer is done and set the frequency value to suit your flashing. Or alternatively if you have all the increase and flash already setup to suit your engine speed and you just want to do that then feed it tacho frequency instead of engine speed in your setup so that it moves with the tacho sweep. Perfect thank you, i'll see what I can do Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.