akitaka Posted July 18 Report Share Posted July 18 G5 Voodoo Pro with Razor PDM and Link RACEPAD Question. I can't choose RACEPAD with PDM Link Should I wait for a new software release? Thank you in advance for your help Currently testing with G4X XtremeX. Currently testing with G4X XtremeX. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted July 18 Report Share Posted July 18 Doesn't look like it's going to be in the next PDM release, maybe the one after, you can use it with the ECU controlling it and telling the PDM what to do though. Quote Link to comment Share on other sites More sharing options...
akitaka Posted July 19 Author Report Share Posted July 19 Thank you. Looking forward to your next upcoming release. Quote Link to comment Share on other sites More sharing options...
akitaka Posted Tuesday at 01:43 PM Author Report Share Posted Tuesday at 01:43 PM I have decided to install a RACEPAD via Voodoo Pro My question is, how do I wire the Molex Mating Connector? I have looked for it myself, but could not find it Thank you in advance for your help. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted Tuesday at 09:31 PM Report Share Posted Tuesday at 09:31 PM This is from a Blinkmarine pdf, the wires in the 4 pin deutsch may not be in the same order as we specify it to be wired to match our connector pinouts. Quote Link to comment Share on other sites More sharing options...
akitaka Posted Wednesday at 03:39 AM Author Report Share Posted Wednesday at 03:39 AM thank you very much Next question What signals are IN0~IN4 and how do they affect the RACEPAD? This is my first time using them, so there are a lot of things I don't know! Quote Link to comment Share on other sites More sharing options...
Vaughan Posted Wednesday at 03:47 AM Report Share Posted Wednesday at 03:47 AM 4 minutes ago, akitaka said: What signals are IN0~IN4 and how do they affect the RACEPAD? They are 0-5V analog signals that can be wired up to sensors or switches and their voltages are sent to the ECU over CAN. Make sure to use the supplied 5V power supply for them and make sure none of them are connected to more than 5V. There are "External Analog" selections in the CAN -> CAN Keypads -> CAN Keypad 1/2 that show up when a supported keypad is selected that allow you to select which CAN Analog input in the ECU that their value should be put into. TLDR: Extra IO that can be received by the ECU. Quote Link to comment Share on other sites More sharing options...
akitaka Posted Wednesday at 04:09 AM Author Report Share Posted Wednesday at 04:09 AM thank you very much I haven't connected it yet, so I'll connect it and give it a try. Vaughan 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.