MattyC Posted Wednesday at 06:46 AM Report Share Posted Wednesday at 06:46 AM Hi Folks, just in the process of setting up a link IAT sensor, Ive borrowed some unused loom from the MAF and have run one pin to sensor ground and the other to An temp 4 on the g3 linkplus. What sensor type do i select ? does it require calibration, im seeing an error of "Input at 5v" and the sensor is showing -50c in PC link, Quote Link to comment Share on other sites More sharing options...
MattyC Posted Wednesday at 07:24 AM Author Report Share Posted Wednesday at 07:24 AM Ok , so I played around some more and set the faults, there was no voltage min and max setup on this temp input, set them up and its now saying ok, but still reading -40c Quote Link to comment Share on other sites More sharing options...
MattyC Posted Wednesday at 07:42 AM Author Report Share Posted Wednesday at 07:42 AM well hot damn, posting on this forum seems to be the path to solving ones own issues, found another thread, set the sensor to delphi, remembered to plug it in, shes now reading properly, job done. dx4picco 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.