redmist Posted July 13, 2007 Report Share Posted July 13, 2007 I've been sold an LEM G3, from one of your dealers, on the premice that I can use my DI channel for wheel speed sensing and still switch on and off antilag using PC Link. However I'm having doubts that I can use the LEM in this fashon. PC Link demands that I set a DI channel for use with antilag. Can I set it to some arbitary channel and still have antilag enabled/ disabled via PCLink? Regards, Daniel. Quote Link to comment Share on other sites More sharing options...
ashesman Posted July 15, 2007 Report Share Posted July 15, 2007 The dealer was correct in telling you that you can do speed and switch anti-lag through PCLink.   Ideally selecting the 'OFF' option for a DI Control Channel should mean that Anti-Lag is on all the time. It turns out that the OFF setting makes it off all the time!!! The next firmware update will have that fixed and the option will be re-labelled to "Always On". For now you should be able to select DI2 and have it force Anti-lag on all the time. Quote Link to comment Share on other sites More sharing options...
redmist Posted July 17, 2007 Author Report Share Posted July 17, 2007 Ashley, thanks for the confirmation. Daniel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.