Jim Lipsit Posted December 16, 2011 Report Share Posted December 16, 2011 Hi Folks, I have an early Link LEMV1 ECM in use with a 1994-1995 Subaru EJ20 motor from Japan in a sand rail dune buggy. It usually runs very well, but occasionally it won’t start (will crank, but no ignition). I have read that sometimes these engines have faulty Camshaft / Crankshaft positioning sensors. The usually start working after the sensor / engine has cooled down a bit. My specific question is: If the Cam or Crank shaft position sensor is bad will the Link LEMV1 prevent the ignition from firing? These are connected to Trigger 1 and Trigger 2 in the ECM. Any input would be appreciated. Thanks, Jim Lipsit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.