M_PCG Posted August 6, 2014 Report Share Posted August 6, 2014 hi guysI al ready tune toyota HILUX 3RZ With g4+ atom .. every things was ok .. main rev limit is 6200 RPMmy question ,, how can i do secondary rev limit . 5500 rpm or any REV RPM ,,i triED digital input GP function . but i cant active ,,can YOU help me ,,,, Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 6, 2014 Report Share Posted August 6, 2014 Hi PRO CAR GARAGE, If you could be more precise on exactly what parameters you wish for the rev limiter to work I could set it up exactly. I have attached a sample of how to setup a basic GP REV LIMITER 2. Regards Dave. khalifa 1 Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 6, 2014 Report Share Posted August 6, 2014 Hi, I forgot to add that I set this GP REV LIMITER 1 with Digital input 1 being ON or OFF. 0 = OFF 1 = ON. If you set up this type of Y AXIS using a Digital Input, you only populate the 1 column. The 1 column is on therefore the values in the slots will be used only. Regards Dave. Quote Link to comment Share on other sites More sharing options...
M_PCG Posted August 7, 2014 Author Report Share Posted August 7, 2014 thank u so much dave  i will try today , then i give you the result ,,,,  Quote Link to comment Share on other sites More sharing options...
M_PCG Posted August 9, 2014 Author Report Share Posted August 9, 2014 hi dave still have problem ,, i connected digital input one is ok ,,, i do rev limit one 5500 RPM ., but rev limit 1  . i did  ur step  not active . i try MGP & MAP & differential fuel press(KPA). all not working ,, can u help me Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 9, 2014 Report Share Posted August 9, 2014 Hi PRO CAR GARAGE, What is the second rev limiter used for exactly, I was just giving you an example. Tell me what your digital input is a switch, how is that set up. Tell me exactly how you want the second limiter to be activated and at what value. Do you want it as a pit lane limiter or a valet limiter, novice driver limiter etc. Attach your Tune file (PCL FILE) PLEASE. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 9, 2014 Report Share Posted August 9, 2014 pHi PRO CAR GARAGE, I have added another example, this rev limiter is set up via gear position. Sorry I didn't include the digital input setup last time. You need to advise me if your digital input is negative or positive. Regards Dave. Quote Link to comment Share on other sites More sharing options...
M_PCG Posted August 10, 2014 Author Report Share Posted August 10, 2014 hi dave thank for help . my idea .  I just open switch  go to 5500 rpm , close the switch back to 6200 rpm , Quote Link to comment Share on other sites More sharing options...
M_PCG Posted August 10, 2014 Author Report Share Posted August 10, 2014 table 2 Quote Link to comment Share on other sites More sharing options...
M_PCG Posted August 10, 2014 Author Report Share Posted August 10, 2014 GP RPM LIMITÂ Quote Link to comment Share on other sites More sharing options...
M_PCG Posted August 10, 2014 Author Report Share Posted August 10, 2014 DG INPUT 1 Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 11, 2014 Report Share Posted August 11, 2014 Hi PRO CAR GARAGE, What version software are you using out of curiosity. Now you want a simple second stage rev limiter , You turn switch on, engine rev limits to 5500 rpm, Turn switch off rev limit returns to normal rpm. So for this to happen you need the following. 1. Digital input 2. GP RPM LIMIT 1 or 2 to be selected. 3. GP RPM LIMIT TABLE. Now step 3 the GP RPM LIMIT TABLE MUST have 2 axis to operate, the Y (VERTICLE) AXIS which will be you DIGITAL Input. Also you will also require an X AXIS (HORIZONTAL). So you just want a switch to turn on, engine limits at 5500 rpm. Switch off engine revs normally. You don't want any other parameters involved , speed, tps etc, doesn't mater. I have attached again a very simple second stage rev limiter, this time I have based the X AXIS off THROTTLE Position, so if the TPS is opened more than 1.2 % all the way to 100% the engine will rev limit at 5500 rpm. For this to work properly as per my example, you must connect 1 side of the switch to the DIGITAL INPUT 1 on your ECU and the other side of your switch to ground. (chassis) or good negative. Keep this simple, there is no reason for you to use advanced modes or anything, unless there are conditions you haven't advised me on. I hope this helps. Regards Dave. Â Quote Link to comment Share on other sites More sharing options...
M_PCG Posted August 21, 2014 Author Report Share Posted August 21, 2014 hi dave  i did the rev limit is active ... very good job ..  thank u so much ..  regards Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 22, 2014 Report Share Posted August 22, 2014 Hi PRO CAR GARAGE, at your request my email is [email protected] website is protuningcairns.com  (still under construction). Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 22, 2014 Report Share Posted August 22, 2014 Sorry web site is www.protuningcairns.com Regards Dave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.