Guest |198| Posted November 28, 2008 Report Share Posted November 28, 2008 Rayhall, I know you posted up that the interface cable below is what I would need to allow the V88 and the MXL to talk at the correct baud rate. I also know that you have been in contact with Cristiano over in Italy for AIM. We are getting the software today for the dash (Thank you for the help with the S/W!!!), but still lack the interface cable to correct the difference in the baud rate. Cristiano e-mail us (Chad at AIM in the USA) that he did not have the interface cable and that he was under the impression that you had the cable. Who do I purchase this interface cable from? It is the last component I need for the V88/MXL interface. Just let me or b18cls1 (Jay @ Carter Race) know and we will buy it ASAP!!! Quote Link to comment Share on other sites More sharing options...
rayhall Posted November 28, 2008 Report Share Posted November 28, 2008 Yes I make the AIM dash Interface. I have them in stock. I can ship one on Monday if I get an order from Jay. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |198| Posted November 29, 2008 Report Share Posted November 29, 2008 Excellent.... will have him order it monday!!! Thank you very much!!! Quote Link to comment Share on other sites More sharing options...
Guest |201| Posted December 10, 2008 Report Share Posted December 10, 2008 Did the adapter arrive? Did you get it up and running yet? Quote Link to comment Share on other sites More sharing options...
Guest |198| Posted December 11, 2008 Report Share Posted December 11, 2008 Did the adapter arrive? Did you get it up and running yet? The shop is closed because they are at PRI..... I might be able to get there tomarrow, if not I'm going back Monday. I'll keep you posted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.