Guest |99| Posted December 17, 2008 Report Share Posted December 17, 2008 Hi Ray, Has there been any progress on enabling the on-board logging? For the runtime plots it would be handy to have a cursor that can be placed on the plot and have the values displayed rather than having to switch between the plot and the data table! Secondly, is it possible to have the fault settings under the Analogue Inputs activate the CEL light when they are out of range. This would make trouble shooting easier and give a visual warning that something is wrong. Thirdly, spare outputs from Injectors and Ignition can only be used for simple switching functions (as mentioned in the manual) however the dropdown menus indicate that PWM is possible for boost solenoids etc but the is not dedicated PWM option. If simple switching only is possible then the drop down menu needs to be changed. Can you let me know which is correct (software or manual)? Thanks Quote Link to comment Share on other sites More sharing options...
rayhall Posted December 18, 2008 Report Share Posted December 18, 2008 Data logging using the ECU memory is in the next firmware update that should be available next week. The CE light errors codes are coming soon. Aux outputs 1 to 8 can be used for user defined PWM control using a 3D table. Spare injector and Ignition output do not have this feature at the moment. Injector and Ignition outputs can only be used for PWM control when using a dedicated function like boost control. Ray. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.