Guest |239| Posted January 15, 2009 Report Share Posted January 15, 2009 hi everyone, anyone tried using 2 different outputs for 2 diferent fans or fuel pumps ? i seem to select a 2nd fan or pump on the software, and it just blocks the old one off. im trying to get fans to trigger at diferent temps and pumps to prime difernt times. thanxs simon Quote Link to comment Share on other sites More sharing options...
rayhall Posted January 16, 2009 Report Share Posted January 16, 2009 Simon, There are two dedicated fan control functions. These are Main Fan and AirCon Fan. Both have independent on off thresholds. For the second fuel pump control, select an output as a GP Output and setup the conditions for the pump to operate. You could do the same for the second fan if you did not want to use the AirCon fan control. Quote Link to comment Share on other sites More sharing options...
Guest |239| Posted January 16, 2009 Report Share Posted January 16, 2009 cool, thanks alot ray, will be doing all that this weekend simon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.