Gary A Posted March 22, 2007 Report Share Posted March 22, 2007 What voltages are expected by the LambdaLink? I have a wideband/controller with programmable outputs and was wondering what I voltage-lambda scale. Would it be best to use a linear scale x volts = y AFR to z volts = w AFR etc. (eg 0V=20AFR to 5V=10AFR) or Is it expecting a narrow-band style factory output (approx 0.45V = 14.7AFR)? Is there any maximum voltage I should worry about (5V for example?) Cheers for your help... Quote Link to comment Share on other sites More sharing options...
ashesman Posted March 22, 2007 Report Share Posted March 22, 2007 I assume you are talking about the old style LambdaLink with the LED display? This unit is expecting the factory type narrow band reading... The best way would be to manually calibrate your controller as best you can to give cause the LED's to light at the correct AFR's (if your controller allows a multi-point calibration). Quote Link to comment Share on other sites More sharing options...
Gary A Posted March 23, 2007 Author Report Share Posted March 23, 2007 Thanks, I will try and do this. My controller can simulate a narrow band and I can change all its parameters... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.