Anyone got an RB26 Base Map?

[Ian Cormack]

Has anyone got a good RB26 base map that they could send me, the RB base maps supplied with link are for RB25's, I was hoping for a map based on throttle position rather than MAP.

 

Just needs to be good enough to get the engine running, only driving I will be doing on it is round the yard or onto a trailer.

[Dave Kriedeman]

Hi Ian,

I have attached a base file I made up for an R32 GTR I did, this base file resulted in a 413 HP @ wheels at 18 psi.

The PCL file is from an i88 however.

So load the current  iVTS software ver 5.1.0

Save this file to that software then open LINK G4 and iVTS and copy and paste the Fuel table etc over, best I can do sorry.

I don't have the time at present to make you up a G4 file.

Regards

Dave.