zeyad Posted February 16, 2009 Report Share Posted February 16, 2009 Hi guys my G4 plug in for GTI-R JDM installed and it work fine. My problem is .there is no spark when I cranking at all but when I make ignition test from PC LINK its spark very will I try to check all the wiring and it’s OK. I make ECCS TEST & it’s OK .then I change MY G4 ECU with factory ECU and I try to cranking its get spark very will that’s means there is maybe some configuration or dose I need to some wiring change to make it work with my SR20DET but I think it must be direct plug & play to header if there is any wiring work or some configuration please let me know. Quote Link to comment Share on other sites More sharing options...
Kieran Posted February 16, 2009 Report Share Posted February 16, 2009 What are the setting for the ignition setup in PCLink? e.g. Ignition Mode = Distributor? I take it that you're running the standard GTiR dizzy & external coil? Quote Link to comment Share on other sites More sharing options...
zeyad Posted February 18, 2009 Author Report Share Posted February 18, 2009 yes kieran my ignition mode distributor . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.