Chris Dale Posted February 5, 2007 Report Share Posted February 5, 2007 I have an ecu here which I believe is a LinkPlus G1. It is non surface mount with 12mhz crystal. Is the pinout same as G2? Chris Quote Link to comment Share on other sites More sharing options...
ashesman Posted February 6, 2007 Report Share Posted February 6, 2007 Pinout is almost identical, the biggest diference is that the ignition and injection wires on the LPG2 are wired Injector 1 to drive 1, 2 to 2, 3 to 3 etc... where the G1 was wired according to the firing order. So if you use group fire injection and a distributor it wont be a problem, otherwise some wire swaps will be required. However, as much as we discourage it, the G2 can have its firing order set to for example 1,2,3,4 which will fire in the same pattern as the G1. Best to swap wires and set the correct firing order in the ECU but... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.