Direct spark

[goran larsson]

Hi  i have one rwd mitsubishi lancer (1984) with a evo3 engien linkg4+ we are buting directcoils from a honda k20 on it can the mitsubichi cam sensor suport direct spark timing or only wastespark?we are doing the same with a honda d16 linkg4

[Dave Kriedeman]

Hi Goran,

the triggers will support Direct fire ignition (sequential).

However you will require a little bit of pin shuffling, plus you will need to purchase an expansion loom for the mother board as IGN outputs 5 - 8 are on the expansion connector.

The functions assigned to AUX IGN 3 and 4 will need to be moved to the expansion loom and then you will have Aux IGN 1 through to 4 available for use.

You must also setup ignition to DIRECT SPARK instead of wasted spark.

Once you have made these changes and saved them AUX IGN 1 - 4 should be unlocked and you can assign AUX IGN  3 and 4 to IGNITION 3 and 4

Regards

Dave.