davidbek95 Posted September 20, 2015 Report Share Posted September 20, 2015 I have a v88,also a autronic gas analyzer,the problem is,that gas analyzer reads the fuel correctly,i have lastest software in my ecu,but program reads the fuel as 25,which all the time. Regards david Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted September 20, 2015 Report Share Posted September 20, 2015 Hi davidbek95,the analogue volt input on your V88 that you have set up as WIDEBAND AFR is the calibration set as AUTRONIC 0 - 5 VOLT.Also the Autronic Wideband has 2 analogue volt outputs,1 = 0 - 1 volt2 = 0 - 5 volt.The AFR these voltages represent must be programmed into the Autronic AFR meter.From memory FUNCTION 9 and 10, but not 100% on that I would have to check those FUNCTION NMBERS.RegardsDave. Quote Link to comment Share on other sites More sharing options...
davidbek95 Posted September 21, 2015 Author Report Share Posted September 21, 2015 Its been working perfectly,until recently,have to check the setting. Regards david Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.