Guest |112| Posted June 3, 2009 Report Share Posted June 3, 2009 Hi. Thinking on using the standard wastespark coils and a bosch 203 igniter. The coils bosch nr is 0221506453, can this be used? Dwell time? Then to the trigger s, this car have a trigger set up with 36-1 on the crank with a 2 wire sensor and a sync with a 3 wire sensor. The sync trigger bosch nr is 0232101019 or 0232101018, wiring on this? The crank trigger nr is V93HF 6C315AA and a handmarked discription at the side 30E1-34 wiring on this? Quote Link to comment Share on other sites More sharing options...
Guest |59| Posted June 4, 2009 Report Share Posted June 4, 2009 Your dealer (where you bought your Vipec from) should be able to help. Technical support should be obtained from him first, unless there is a genuine problem in communications. Ray is spending too much time answering questions which the supplying dealer should handle. Vipec ECUs should not be sold without proper technical support from the dealer. Quote Link to comment Share on other sites More sharing options...
rayhall Posted June 4, 2009 Report Share Posted June 4, 2009 All the part numbers do not mean much to me. The two wire crank sensor will be reluctor type, and the three wire cam sensor with be Hall/Optical if one of the wires has 5 to 12volts supply. Both are supported. Ray. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.