khaled DRiFT Posted January 9, 2016 Report Share Posted January 9, 2016 hi .. i need rb25det neo ecu pinout , al i found is for the normal rb25det not rb25det neo , does any one have the ecu pinout for it or can help ... thanks Quote Link to comment Share on other sites More sharing options...
Leiden Posted January 9, 2016 Report Share Posted January 9, 2016 I have attached the circuit diagram and the ecu pinouts, these can also be found in the EC section of the R34 Service Manual pdfHope it helps Quote Link to comment Share on other sites More sharing options...
khaled DRiFT Posted January 9, 2016 Author Report Share Posted January 9, 2016 i have the service manual of the r34 and i found the colors and the pin places didn't match with the wiring of the car i thinks its diff. between rb25det and rb25det neo Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 9, 2016 Report Share Posted January 9, 2016 Hi khaled,please find information you require attached below.The Connector block and pin description in the LINK HELP FILE is to suit a REV 1.4 circuit board.There are a few funky things with this ecu.RegardsDave. Quote Link to comment Share on other sites More sharing options...
khaled DRiFT Posted January 11, 2016 Author Report Share Posted January 11, 2016 the pinout that i found at the manual ad pclink help is different from mine Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 11, 2016 Report Share Posted January 11, 2016 Hi,as I stated the pinout is for a revision 1.4 board.I have attached an RB25 DET NEO ECU SCHEMATIC to help you out as this is all I have.If you can't get the ECU PIN OUT at least you can bell the circuits with the schematics.RegardsDave. khaled DRiFT 1 Quote Link to comment Share on other sites More sharing options...
Leiden Posted January 11, 2016 Report Share Posted January 11, 2016 (edited) Remember that the pinouts are viewed looking into the ECU side of the connector, or the wiring side of the loom plug. In the photo above you are looking into the loom plug from the ecu side, and its also upside down.From memory all grey plug ecu's are interchangable. I have used a stagea ecu to run a Neo RB25DET R34 when the traction control system has been removed. Edited January 11, 2016 by Leiden O'Sullivan khaled DRiFT 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.