Guest |405| Posted August 21, 2009 Report Share Posted August 21, 2009 Hello Ray, Just wondering what table or scale to use with a innovate lm-2 wideband for the V44 input ? I see there are three scales predefined could one of them be on the money ? Quote Link to comment Share on other sites More sharing options...
rayhall Posted August 21, 2009 Report Share Posted August 21, 2009 I am not familiar with the LM-2. With LC1 it has two outputs. One is a narrow band signal and the other a wide band. Select NB Oxy for the narrow band signal. For the wide band, select Wideband and select a Cal as the calibration. Use these settings Input A = 0.0 Output A = 7.35 Input B = 5.0 Output B = 22.0 Quote Link to comment Share on other sites More sharing options...
Guest |405| Posted August 21, 2009 Report Share Posted August 21, 2009 Thanks ! KPA Quote Link to comment Share on other sites More sharing options...
Jean Niemi Posted August 24, 2009 Report Share Posted August 24, 2009 Note, that LC-1 default is 0 to 5 volts = 7.35 to 22.39 AFR. (Not that 0.39 makes big difference, but to be exact.) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.