Guest |99| Posted January 11, 2010 Report Share Posted January 11, 2010 As per a couple of previous topics, I am setting up a V8 with 16 injectors in a group/staged fashion. I am also using a 4 ch CDi so will be operating as wasted spark on Suzuki COPs. My question is: do I still need a cam sync for this configuration or will 4 tooth sensor on crank be sufficient? Thanks Quote Link to comment Share on other sites More sharing options...
rayhall Posted January 11, 2010 Report Share Posted January 11, 2010 You will need a missing tooth crank trigger. Use a 24-2 trigger wheel. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |99| Posted January 11, 2010 Report Share Posted January 11, 2010 For the 24-2 setup I guess I would set the start of the missing teeth @ 60 BTDC and set 'trigger off-set to 60 degrees. I have sent my crrent setup by email if you could have a quick check. Quote Link to comment Share on other sites More sharing options...
rayhall Posted January 11, 2010 Report Share Posted January 11, 2010 Where the missing teeth are does not matter. I got your map and replied back to you. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |99| Posted January 11, 2010 Report Share Posted January 11, 2010 Thanks for having a look. Quote Link to comment Share on other sites More sharing options...
Guest |99| Posted January 11, 2010 Report Share Posted January 11, 2010 we are building now, so hopefully we will be on the engine dyno in a couple of months to start the tuning. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.