Guest |317| Posted February 16, 2010 Report Share Posted February 16, 2010 So, I have a V88 here. It is all wired up to a VVTI 2JZGTE and ready to start but, can't get the ethrottle to do anything. Is it going to have to be towed to a Vipec dealer to make the electric throttle work or is there any other alternative? How does one go about becoming a Vipec dealer? I have a fully equipped shop here, including dyno, lab scope, latest computers and diagnostic equipment etc... Quote Link to comment Share on other sites More sharing options...
rayhall Posted February 16, 2010 Report Share Posted February 16, 2010 The electronic throttle control has a lot of error checking. Everything has to be correct for it to work. For dealer inquires. Send an email via the contact page on the website. http://www.vi-pec.com/page_files/contact.htm Ray. Quote Link to comment Share on other sites More sharing options...
Guest |317| Posted February 16, 2010 Report Share Posted February 16, 2010 I will make an inquiry tomorrow from work, thanks. Is documentation forthcoming on this option for the general public or will this remain for dealers only? Quote Link to comment Share on other sites More sharing options...
rayhall Posted February 16, 2010 Report Share Posted February 16, 2010 The throttle control is still going through development with more features being added each firmware update, so it is still considered a dealer only feature. I am happy to look at your map and make suggestions to help get it working. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |317| Posted February 17, 2010 Report Share Posted February 17, 2010 Shall I email you the .pcl file to the same address? Your forum is not allowing me to attach the file because it has an extension on it. I have gotten it to the point where it works from the ethrottle target table but not from foot pedal sensor input... Edit- There was no email address! LOL. Quote Link to comment Share on other sites More sharing options...
Guest |493| Posted June 16, 2010 Report Share Posted June 16, 2010 I have this setup working on an '01 vw GTI 1.8t. Seems to be working well as it was setup from the person we got the plug-n-play setup from. Not sure how to tune the tip-in though..would like to find some tips on doing that Quote Link to comment Share on other sites More sharing options...
rayhall Posted June 16, 2010 Report Share Posted June 16, 2010 There was no email address! [email protected] Ray. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.