Guest |150| Posted August 5, 2010 Report Share Posted August 5, 2010 is this an internal fault or could it be the result of a short? v44 ecu all the sensors are reading max, regardless if they are connected or not. internal map is at 30 000kpa no problems for 3-4weeks before the 5v supply error. i don't have acces to the car, first hand.(owner reset the ecu to factory settings before i could check the statistic page) but i've got a runtime log with the problem. thanks -Marius Quote Link to comment Share on other sites More sharing options...
rayhall Posted August 6, 2010 Report Share Posted August 6, 2010 If the V44 has 4.4.1 or latter firmware and the error limits are not setup, you can get analog inputs showing strange values. The software shows the condition of the 5v supply in the runtime values. Press R to open this window and then select ECU Status. Ray. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.