Dantical Posted August 16, 2018 Report Share Posted August 16, 2018 Hey, i got a Thunder ECU and i want to use the AEM UEGO X Series for the Wideband over Can to the Ecu . The Ecu has 2 K-Type EGT Inputs and 2 Wideband Inputs .. is there a Chance to use the Wideband Inputs for 2 extra K-Type EGT Sensors? I will be using 4 EGT K-Type Sensors and i thought maybe i can Switch the Wideband Inputs to K-Type ? But i guess it´s not possible - right ? Otherwise i have to buy a EGT Can Interface to get the Signals to the Ecu - but if i can use the Wideband Inputs there would be no Need of the Interface,.... Thank you Quote Link to comment Share on other sites More sharing options...
exileperformance Posted August 16, 2018 Report Share Posted August 16, 2018 You will have to get something like the Aem K Type Can Module to run more egt inputs. Why not use the onboard wideband instead of the UEGO Quote Link to comment Share on other sites More sharing options...
Stevieturbo Posted August 18, 2018 Report Share Posted August 18, 2018 others have already used the ECUMaster EGT to CAN device for up to 8x EGT's And it's very cheap, seems to operate at around 5Hz which is fairly slow, but a thermocouple isnt super fast anyway so it's fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.