fiestacosworth Posted October 25, 2018 Report Share Posted October 25, 2018 hi. so my can lambda running on my monsoon ecu was working fine. was running a log and it just stopped reading! so run a log to record it and i am getting error 16 heated too long. also error 33 open circuit APE-IPE and 34 open circuit RE-IPE and its cycling between these 3 faults. can anbody shed any light on what is going on here!! i have checked the sensor and the wiring visually and everything looks good. no loose wires pins etc any help would be much appreciated! thanks. luke. Log 2018-10-21 12;22;31 pm.llg Quote Link to comment Share on other sites More sharing options...
fiestacosworth Posted October 26, 2018 Author Report Share Posted October 26, 2018 For anyone who has this same issue. i cut the live wire feed for thr can lambda and run a new wire direct from the battery and it works perfectly thanks adam. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.