Wesismyhero Posted March 3, 2019 Report Share Posted March 3, 2019 So I'm trying to wire in a AEM digital wideband AFR gauge to my Link G4+ for a 350z. I ordered the expansion loom and noticed once its plugged into the ecu board, I don't have a way to get it out of the case. Do I need to make a hole in the case for my loom? I dont really want to put a hole in the case. Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted March 4, 2019 Report Share Posted March 4, 2019 If you don't want to drill a hole in the case , then you can cut and splice into one of the analogue volt inputs for the lambdas on pin 16 (an volt 11) of the main header connector. HTH, Richard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.