golf-2 Posted March 5, 2019 Report Share Posted March 5, 2019 Hello, About the wiring of the Accelerator Pedal Position Sensor from the vw golf mk5 any one know the pinout of it?? this is the factory wiring , but didn't mention the the 5v , signal , ground thanx Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted March 5, 2019 Report Share Posted March 5, 2019 If it's standard vw wiring (which it appears to be ) then:- Pin 1 and 2 are +5 Pin 3 is ground Pin 4 is Output 1 Pin 5 is ground Pin 6 is Output 2 These are the VW designations, check scaling on out1 and out2. HTH, Richard. Quote Link to comment Share on other sites More sharing options...
gtihk Posted March 6, 2019 Report Share Posted March 6, 2019 Is it a DI engine? Does Link support this engine? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.