Guest |722| Posted January 1, 2011 Report Share Posted January 1, 2011 I've been digging through the documentation and trying to figure out how/why I'd use some of the virtual outputs. Just curious what example applications people are using them for? Quote Link to comment Share on other sites More sharing options...
rayhall Posted January 1, 2011 Report Share Posted January 1, 2011 The virtual aux outputs can be used to control a hardware aux output based on many parameters. Example you have a hardware aux output setup as a GP Output. This gives you three conditions to control this output. If you need more conditions, then use the output from a virtual output as one of the conditions for the hardware output. This will give to 5 condition. Example:- Virtual Aux 1 Condition 1 = TPS > 80% Condition 2 = ECT > 40 deg Condition 3 = ECT < 100 deg Aux 4 (hardware output) Condition 1 Aux Virtual Value On 1 Condition 2 = MAP > 40 kpa Condition 3 = Gear > 2 This would turn on Aux 4 output when all these conditions are met. You can stack up the virtual outputs so you have many many conditions to control some device. Another common use is for Virtual outputs is turning on the ECU memory logger. Ray Dawood Garage 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.