gojira Posted September 12, 2016 Report Share Posted September 12, 2016 hi, i have Vipec I88 wire in ecu, about the same as G4+ Extreme.Whanted to set transition ignition control on Rpm VS map Delta based.But the ecu doesn't let me set - negative values only positive.With TPS delta negative values is no problem as Y axis. Is this bug or normal that i can't set negative values as axis with MAP Delta? Quote Link to comment Share on other sites More sharing options...
Scott Posted September 13, 2016 Report Share Posted September 13, 2016 Hi,This looks to be a problem not with setting negative values on the axis, but that MAP delta has not been setup to go negative. When I look at the parameter info it looks like the lowest possible value is zero.I will ask the engineers about this.Scott. Quote Link to comment Share on other sites More sharing options...
gojira Posted September 13, 2016 Author Report Share Posted September 13, 2016 when you set logging on for tps and map delta.they do go both negative when release trottle or when shifting.only the transient setting doesn't allow negative value as axis. i prefer map delta ignition retard over tps delta ignition retard. Quote Link to comment Share on other sites More sharing options...
gojira Posted November 13, 2016 Author Report Share Posted November 13, 2016 any news about this?Working now with delta TP, but goes not really how i whant it, why doesn't let me do transition map delta negative values? Quote Link to comment Share on other sites More sharing options...
Scott Posted November 14, 2016 Report Share Posted November 14, 2016 Hi,Looking through the firmware and PCLink revision notes I cant find any changes on this, but when testing my ECU with 5.6.4 firmware both the TPS Delta and MAP Delta can go negative.Scott Quote Link to comment Share on other sites More sharing options...
gojira Posted November 14, 2016 Author Report Share Posted November 14, 2016 Offline in pclink you van enter negative values, but when you whant to save the pcl, it says "negative values not allowed".When connected to ecu, i can't even enter negative values.Vipec i88 wire in Quote Link to comment Share on other sites More sharing options...
Scott Posted November 14, 2016 Report Share Posted November 14, 2016 Hi,Sorry, I was using a pre-release PCLink to test it before. It works in this as the engineers have fixed it. When this is released it will be available for you to use.Scott. gojira 1 Quote Link to comment Share on other sites More sharing options...
gojira Posted November 14, 2016 Author Report Share Posted November 14, 2016 I whant pre release also so i can set this good how i whant it and best is. As to tp delta is a Little sooner then the map delta in logging. Quote Link to comment Share on other sites More sharing options...
Scott Posted November 14, 2016 Report Share Posted November 14, 2016 We will have pre-release testing available, but are still working on the next PCLink and firmware release, so will still be a while yet. Send us as email on [email protected] if you are interested in helping with the pre-release testing.Scott. gojira 1 Quote Link to comment Share on other sites More sharing options...
gojira Posted November 14, 2016 Author Report Share Posted November 14, 2016 Always in the Mood for helping out and testing.Mail Will be send out within 5min. Quote Link to comment Share on other sites More sharing options...
gojira Posted May 8, 2017 Author Report Share Posted May 8, 2017 works like a charm now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.