dineane Posted September 28, 2019 Report Share Posted September 28, 2019 Hello I purchased the link 350z ecu and installed it into the shop car . I downloaded the software on 2 separate windows computers . One has windows 7 and the other has window 10. when I go to plug in the link plug in the computer it not picking up the ecu on both.Yes the ignition is on . i tried changing the com from 1 to 10 on both computers , I tried the auto com function . no good . The blue light on the ecu is on but wont connect . I don't know what else to do . Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 28, 2019 Report Share Posted September 28, 2019 In windows device manager in the ports Com & lpt section, is there a link USB ecu device showing in there? And no yellow exclamation marks beside it? Quote Link to comment Share on other sites More sharing options...
dineane Posted October 10, 2019 Author Report Share Posted October 10, 2019 I got it to work . The wire from the link ECU board to the casing ( were the usb plug goes ) , had came out . I did a continuity test on the cable and the yellow wire was not making contact . I soldered it back . Good as new . The tech team set a new cable . Great customer service Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.