dee242 Posted March 13, 2020 Report Share Posted March 13, 2020 hi trying to set up my aem ethanol senor on my 300zx link g4+ converted to gtrlink i have the sensor wired getting 12v ign ground and digital output 4 but when i try to connect nothing happens and says error r33 non tune new iat.pclr Quote Link to comment Share on other sites More sharing options...
Simon Posted March 13, 2020 Report Share Posted March 13, 2020 Have you had the engine running with sensor fitted? Quote Link to comment Share on other sites More sharing options...
dee242 Posted March 13, 2020 Author Report Share Posted March 13, 2020 17 minutes ago, Simon said: Have you had the engine running with sensor fitted? yes Quote Link to comment Share on other sites More sharing options...
Simon Posted March 13, 2020 Report Share Posted March 13, 2020 Only check there is that there is a lock out for a little bit after start up. So would only expect it to read after a bit of running. Set up really is just turn on the Di to Ethanol Sensor and pullup on. And you have this done. Then it is just down to wiring and sensor. dee242 1 Quote Link to comment Share on other sites More sharing options...
dee242 Posted March 13, 2020 Author Report Share Posted March 13, 2020 okay got it working had it wired in correctly pc link is not showing me the ethanol content tho it just says sesnor status ok Quote Link to comment Share on other sites More sharing options...
Simon Posted March 13, 2020 Report Share Posted March 13, 2020 So that is just the status. There is a dedicate Ethanol % runtime value and also Temp. dee242 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.