Trdmr2t Posted May 10, 2020 Report Share Posted May 10, 2020 Hello this is actually my first post but anyway while trying to wire in a wide band knock sensor I noticed there are 3 different AnVolt 4 connections in the pin out diagram. Is this a normal situation and would It be correct to wire in the aftermarket knock sensor to pin 34 "AnVolt 4", which is the oem knock sensor pin out location. Also curious to why there is an asterisk on the AnVolt 4* in the expansion loom? I have a G4+ TST185 Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 10, 2020 Report Share Posted May 10, 2020 Sorry, it looks like there is a typo there. Pin 34 should say "Knock 1", this is the pin your knock sensor needs to be connected to. This pin has nothing to do with AN Volt 4. Pin 37 & Exp 4 are both connected to AN volt 4. Quote Link to comment Share on other sites More sharing options...
Trdmr2t Posted May 10, 2020 Author Report Share Posted May 10, 2020 17 minutes ago, Adamw said: Sorry, it looks like there is a typo there. Pin 34 should say "Knock 1", this is the pin your knock sensor needs to be connected to. This pin has nothing to do with AN Volt 4. Pin 37 & Exp 4 are both connected to AN volt 4. Ok sounds good thanks for clarifying! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.