techsalvager Posted June 6, 2014 Report Share Posted June 6, 2014 Hello I was interested in the v44 before seeing as it suppodesly supported maf inputs. I don't see a load factor for maf fueling, only map, bap, etc under fuel config I see you can set a maf in analog inputs, but the cal setup for it, is not nearly enough that I've seen for a proper maf transfer function to be made. Can anyone enlighten me on how the maf support works? I once talked to a repersentative of vi-pec at PRI show in 2012 and was basically told me off for wanting maf usage, and that vipec didn't support it and that left a bad taste for customer support in my mouth. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 9, 2014 Report Share Posted June 9, 2014 Essentially the system is geared to run MAP based so MAF is very much secondary. There are people that have done it but it is not an option I would be recommending. This is a thread on the topic viewtopic.php?f=3&t=1513 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.