Piar Posted September 6, 2014 Report Share Posted September 6, 2014 I want to know is it possible to run 2 separate injectors set? I mean I have I88 4 cylinder engine And I want to run gasoline and LPG( separately of course) I want that I88 to control both sets gasoline and LPG injectors( sequentaly) So there is only one problem: to activate another set of injector simultaniously with switching second fuel map Quote Link to comment Share on other sites More sharing options...
Simon Posted September 8, 2014 Report Share Posted September 8, 2014 The best option I can think of is to use a Aux out to switch the 12V power supply between the injectors. Having only one set powered at a time. Then when the switch is request the maps and aux out switch on the same input condition. Its not ideal as you will only have one master fuel figure and one set of dead time values. Quote Link to comment Share on other sites More sharing options...
Piar Posted September 8, 2014 Author Report Share Posted September 8, 2014 ok) But I think it would be very useful to add second master fuel/injector latency/cranking time to have really independent 2 fuel maps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.