Lance Jonas Posted September 13, 2013 Report Share Posted September 13, 2013 Hi there. I've recently had my rb25 apart to replace the head gasket. However now I have it back together, I have error codes flashing up via the engine check light. I get a code 17(one long flash followed by 7 short) and code ? (one long flash followed by 10 short flashes) Any clues as to what this means? Thanks, - Lance Quote Link to comment Share on other sites More sharing options...
Simon Posted September 16, 2013 Report Share Posted September 16, 2013 Fault 17 is AN volt 3 at ground this could be from the map sensor being unpluged. If you connect with PC link it will let you clear them. The help file of PC link also gives a full run down on all codes. Quote Link to comment Share on other sites More sharing options...
Lance Jonas Posted September 17, 2013 Author Report Share Posted September 17, 2013 Cheers Simon. I downloaded PC link after realising it was something I could use myself and cleared the codes and all is now well. Thanks for the help, - Lance Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.