Jump to content
Sign in to follow this  
motionper

activating aux 4 with di1

Recommended Posts

i am using di1 with my clutch switch as a launch control i feed twelve volts thru the switch when the clutch is in i want to groynd a relay off of di1 with the same  but it won't activate unless i leave di1 off if i put it di1 on it doesn't work ---help

Share this post


Link to post
Share on other sites

Hi Bob,

Do you have a spare DI you can setup, use a dual pole relay and set the second output from the relay to another DI to achieve what you want.

Sorry for the lame work around, I am very busy and just thought I would suggest this as a temporary setup until myself or Simon have time to make a pcl configuration up and test it for you.

Is this setup separate to your earlier IC SPRAYER question.

Regards

Dave.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...