ericsiewkk Posted April 12, 2016 Report Share Posted April 12, 2016 how do we calibrate the knock target table and gain for evo3 4g63?i am using 6khz filter on bosch sensor Quote Link to comment Share on other sites More sharing options...
Simon Posted April 12, 2016 Report Share Posted April 12, 2016 You need to be able to run the engine with no knock first.You will run it through a full run and log the noise levels.Gains will need to be adjusted to keep the cylinders even and the max noise level under the 1000 maximum typically aiming for around 350-450 at full powerThe table is then filled to figures about 20% above the actual noise levels. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.