Petros30 Posted January 14, 2017 Report Share Posted January 14, 2017 hello,Τhere is any recommend place to put my ignition module channel to not have problem with signal from sensor. I put it beside the ecu it's ok; Also, it is important to have wire with shield for the adapter from my wire harness to the ecu ( length 500mm )?Thanks youPeter MS Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 14, 2017 Report Share Posted January 14, 2017 You should not have any problem from a noise perspective with the igniter next to the ecu. You do not need shielded cable between ecu, igniter or coils. Most igniters need to be mounted on an aluminium heat sink and have some airflow around it for full service life. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.