mikegt4dude Posted December 23, 2018 Report Share Posted December 23, 2018 Choose MAF for Accel Load Axis, Accel/Wakeup load correction column values 0 - 200 for Air per Cylinder Measured (g/cyl) no use to anyone, perhaps a range of 0, 0.2, 0.4, 0,6...2.0 would be suitable Cheers team! Merry Xmas Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 23, 2018 Report Share Posted December 23, 2018 Good spotting, I just tested it, it seems to work ok, just the labelling is wrong. 200 = 2.00g/cyl. The yellow table crosshair also uses the wrong scaling but the green active cell tracks correctly and the correct value does get pulled from the table. So it can be used until we get it fixed. I will add it to the list. Personally, I cant see MAF working well for accel since its quite a way downstream from the effect you are trying to correct for, but give it a try. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.