Mentalbiker12 Posted February 8, 2019 Report Share Posted February 8, 2019 Hey everone im currently working on a tune for a buddy with an st185 alltrac. It is completely stock minus downpipe and the ecu. I got the car up and running good on speed density but I can’t for the life of me get the iat to read. He has the iat 1-8 supplied from link using the pnp harness to the factory afm plug. Anyone have any experience setting this up this way? Or am I gonna have to manually wire this in? Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 8, 2019 Report Share Posted February 8, 2019 Temp sensor should be connected between pin 5 & 7 at the AFM plug. This is AN Temp 2 input in the software. Quote Link to comment Share on other sites More sharing options...
Mentalbiker12 Posted February 8, 2019 Author Report Share Posted February 8, 2019 Awesome thank you I will take a look. I think when I looked there was a bigger gap between the wires so wonder if whoever pinned the harness put it in the wrong one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.